By: D.Rhadika

Fishing is a fun and tranquil sport that lets you spend quiet time with your friends, family and with Mother Nature.

Fresh water fishing is a sport involving the catching of fish in lakes, rivers and streams. It involves a lot of patience, challenge and a lot of acquired skill over time. Anyone can participate in this fun activity, including the kids.

To start, you have to check your State’s fishing requirements and make sure if a license is needed for you to fish. If it is required, you must acquire one by checking with a sporting goods store. They will help you how to get it, and some will even provide it for you.

During the time that you are in your favorite sporting goods store, you can look around and buy the right fishing equipment that you will be need for your trip. Considering that you are a beginner, make sure that you budget well the cost and your spending on the equipment, not deciding on expensive equipments; buy only the basic things you will need.

When in doubt as to what is needed, ask the help of the store keeper, but do keep in mind that you need to stick to a budget. Take your time and don’t hesitate to ask how to use each piece of equipment that is offered to you. Artificial lures for bait can be used or you can simply look for worms from your back yard.

An inexpensive fishing rod and reel will be enough along with a fishing line, hooks, weights, a bobber (this keeps your line afloat), fishing lures and net. A polarized sunglass is also essential, as it will help to see clearly through the water and lessen the glare.

Then if you don’t know the good locations to fish, ask about local “hot” spots, or check your State’s fishing regulations for information about fishing locations around your State.

The time will surely come when you will be a better fisherman; then you may decide on upgrading your equipment. In the meantime, keep things simple.

It is always advised that you avoid fishing alone. Always be with a friend, as when emergency strikes, there can be someone who can call for help.

It is wise to start fishing in shallow waters. Aim your cast in shady or rocky areas where the water is deep, as this is where the fish is expected to be found. Keep in mind that this is all practice first.

As your skill level develops and increases, you can then attempt into deeper waters. But before going, take the time to practice casting to familiarize yourself with your rod and your reel.

What better place to practice than your back yard. To do so, mark off an area using a rope and use this as your guide in aiming your cast. Rehearse and study your movements to discover a method that will work for you. Bear in mind, cast with your wrist, and not with your arm.

Fishing hooks are very sharp and needed to be handled with care to avoid injury. Before casting, it is important that you should look around you and stay unobstructed to avoid hurting other people with your hook.

When the right time has come and you go fishing for real, keep in mind to cast your line always ahead of the fish, making your bait land slowly, with as little splash as possible. The fish will see well at a close point, but cannot see behind.

If your casts are going in a disorganized manner, move closer to the water so you can gain better accuracy.

Watch the bobber closely for any movement. If and when a fish grabs the bait, the bobber will be pulled under water. This signals that you got a fish on the line. Don’t get too excited. Remain calm.

Keeping your line tight, slowly reel in your catch. Place the net near and use it to bring the fish out. Remove the hook from the fish with great care.

If you got an undersized fish (as noted in the state’s regulation book), quickly return it to the water. Likewise, if you have no intention in eating your catch, do not waste it and return it to the water. Releasing the fish will supply the water with more fish, giving future fishermen the thrill to experience a catch.

Lastly, look around you and feel the calm, restful and serene view of the river.

Have fun!

By: D. Rhadika

Spoons

Considered the most simple of all other lures, they got their name because they look like the head of a spoon. They act for the bait fish by doing a flickering and wobbling movement or action. Spoons are excellent for starters in lure fishing; easy to use and very affordable.

Spinners

The spinner is basically a blade wherein it does a rotating action on a spindle when being retrieved or taken back through the water as well as it gives off a flash as light is being reflected on the revolving blade, characterizing the bait fish’s scales and movements. This is a lure that is flexible because only can one verify and know the retrieve depth by the period or time frame one leaves before one starts a retrieve, one can also alter the speed of the revolving blade around the spindle, by either speeding up or slowing down one’s retrieve. For the Trout and Mullet, a smaller size is recommended, and a larger spinner with the pike liking, along with the treble hook in a red wool.

Surface lures

These lures are used on the water surface and considered to be the most explosively thrilling of all lures as one could actually see the fish taking the lure, and the anticipation and the expectation of one looking forward of the take is an exciting experience. The fish can be completely seen exiting the water when they send off at a surface lure. Since these lures are being retrieved on the surface of the water, they can be a good choice in areas that have a lot of weed.

Suspending plugs

Having neutral buoyancy and resistance, when the plug has dived or dropped to the required depth and left alone, it will continue on being suspended to that depth. For this reason, this type is perfect for pursuing your prey hidden near the weed beds, rocks or banks. When yanked in order to imitate life to the plug, it causes some crashing attack from your target.

Floating drivers

A necessity for all lure anglers, they cover a wide scope in diving depths; beginning from just beneath the surface up to fifteen feet or more. The diving depth is established on the point of view of the vane or fin to the body of the lure. The lesser the angle to the body of the lure the deeper it can dive. The shape as well as the size of the vane and the lures body contributes to the movement of the plug in the water.

Sinking plugs

These are excellent for deep water fishing, wherein the retrieve can start soon as the preferred depth is reached. This is accomplished by counting down before one starts the retrieval process. Therefore, the same depth will be reached whenever one casts. The distance that the lure has sunk down in a particular time, will give a suggestion of how deep or how far down the fish are situated when they strike; thus this is called the sink rate of the lure.

Soft baits

This is soft rubber bait that comes in various shapes and forms, with matching sizes and colors. These are commonly used for sea and fresh water fishing, which can be used on a weighted jig head handled in the same manner as the jerk bait, being managed as a plug is used.

Jerk baits

Having no movement of its own when in the water, the angler gives life to this lure; whenever the rod trembles or shakes or jerks, this lure can appear to have life. This lure for the most part, mimics an injured or wounded fish that the prey fish find tempting, and be compelled to thrust or lunge at.

By: D.Rhadika

When summer time comes and salmon are starting to run, many people who like fishing visit Alaska. Tourists tend to know when the salmon run starts. This may not be on purpose but they do know the best place to catch salmon is in Alaska.

Alaska’s waters make their tourists get the Alaska fishing guide and provide the tourists the best spots in Alaska for fishing. First, you have to know what kind of fish you want to catch. You can choose from different varieties of fishes like silver salmon, arctic char, steelhead, Alaska king salmon, rainbow trout, or any other fish.

The Arctic, Southwest, South central, Southeast and the interior are the five known geographical places in Alaska. These are the sites where you can maximize your fishing expedition. You have to hire a fishing guide since you do not know the area. They may give the best spots for you and accompany you to your fishing.

Here Are Some Things You May Want To Ask From Your Guide

1. You have to know how long they have been doing their work in Alaska. It is good if they have been staying there for a long time already. The reason is that they have much knowledge about the different yearly cycles of Alaska.

2. Be aware of the time you will spend during the trip. Also, make note of the time that you will need during the actual fishing. The amount that you will pay your guide might only be consumed on the time of the boat ride rather than the fishing itself.

3. Ask how much a particular guide would cost, because they have different rates depending on their skills, experiences and length of stay in their job. A guide that would cost cheaper than the average rate of the other guides might not have enough experience and skills.

4. It is recommended that you have your references. This will help you narrow down your choices in selecting a fishing guide. Most people who have been there are willing to share about how satisfied they were during the fishing vacation. They can also give you some advice on what you need to do during the adventure.

5. Remember, this is a chance for you to ask about particular issues that concern you. Do not hesitate to gather information from your guide. By this time, you should be able to have your final choice for your Alaska fishing guide that will be perfect for your plans and make the most out of your trip in Alaska.

By: D.Rhadika

Rods are basically made from carbon. Plastic, composite carbon combined with Kevlar, which is a kind of material that is bullet proof, or just high carbon. Since the carbon's force and strength in connection to its mass is light, making it strong material that can allow thinner fabrication but still is able to keep the span and length. A rod that is lighter evidently handling will be easier, controlling it would be less tiring on ones arms and reduces resistance to air giving one an easier time accurately casting it, particularly on windy ways.

Rods come in silicon carbide, hard chrome or ceramic rings having a function of letting the line pass through. These are precisely used because of their smoothness having the function to minimize friction when passing through the line and keep the maximum strength. Silicon materials are a fact costly, so an alternative is bring into play ceramic rings like Zircon which when taken in to account, it is not as tough or as light, but is much cost effective. Rings made of chrome are better, although every season they require replacement, they do deliver excellent job of line running. At least thirteen rings are needed from the handle all through the tip, lesser near the handle, needing more close to the tip. The line can fasten itself to the rod, if you don’t have enough rings.

When determining length of the rod, you want to take into account exactly what kind of fishing you want. If you want far out fishing, in that case choose a larger rod as this will offer you better control when you are playing the fish. If you are planning to go fishing in an area that is enclosed, you will need a shorter rod. Normally, the safe rod size to choose is13ft (3.9m). This is lengthy enough for a waggler but does not cast out too far.

Handles

Handles are made from either cork or foam. Whichever you choose, this is a matter of preference. Just try handling both materials so you can have a good “feel” before buying it.

Action

Action is the term used in describing how the rod will bend when it is placed under the lot of strain and effort of a fighting fish.

There are two types of tip on a rod, the hollow and spliced tips. Hollow tips are good in catching carp, tench and chub which have a progressive or developing action making it sharp for quick bites, yet proficient enough to manage long distance strikes. Spliced tips normally are normally spliced to the end with two feet solid carbon. This rod is sharper so it is a good pick for fast acting fish.

When choosing a rod, these questions will help you pick the right one:

1. How frequent and where do you fish? Are you a beginner, a weekend warrior, or a tournament pro? If you are just starting out, you may need to budget and spend less money on your first rod. Once you learn the techniques and once you have decided that fishing is for you, that is the time to spend on more specific rods.

2. Freshwater or Saltwater fish? While there are a few rods that can be used for both fresh and saltwater fish, most rods are made for a specific purpose and application.

3. Spinning or Casting? The species you that you choose to chase will determine it.

4. Power, sensitivity, and your technique. The rod should match the way you enjoy fishing. If you like to fish with lures, then you should look for a rod that is comfortable enough to cast frequently all day long.

By: D. Rhadika

In fishing, trout are one of the favorite “fishing friends” of most anglers. These crafty fish are abundant anywhere. The native habitat of these crafty fish depends on the type of trout.

For brook trout, the native habitat includes the territory from Labrador westward to the Saskatchewan, while the rainbow trout is a native of the Pacific slope from Alaska to California.

On the other hand, brown trout has found its way into the waters of every state in the United States except Florida, Arkansas, Kansas, Kentucky, Louisiana, Mississippi, Missouri, North Dakota, Oklahoma, and Texas. It has been reported in the waters of some of these states, but according to conservation officials, no authentic reports have been received. It is also found in many parts of Canada.

In trout fishing, there are some factors that need to be considered in order to have a successful catch.

1. For trout fishing, the leader should not be greased. It will not sink far enough to cause any difficulty when picking the line and lure from the water, but if it is allowed to float; it will cast a shadow on the bottom of the stream which may scare the trout.

2. The trout is one of the fishes that are usually secured through the use of the dry fly. For trout, the current as well as the pools should be fished. It may sometimes be a bit difficult to keep the fly from sinking or dragging because of the various conditions of the current, but this is a matter that the angler will have to figure out for himself.

3. It is not good practice when fishing for trout to fish directly upstream so the flies, line, and leader will float directly over fish. The fisherman should make the cast from one side of the stream so the fly will only float over the fish.

4. It is important to make the first cast the best. A feeding trout will usually strike the first lure presented if it is cast so that it will float over his private domain. The angler should never fail to fish the lower end of the pool first even if the trout are rising in the middle or upper end.

5. Trout are sometimes very moody or selective and will try the patience of any angler; hence, possibly a fly with less hackle will do the trick or it may be necessary to use a spent-wing fly or a fan wing.

Indeed, catching trout fishes can be lots of fun. The anglers just have to remember these tips in order to have a happy catch.

By: D. Rhadika

In the state of Texas, 2 licenses are needed. The first is called the Conservation license. This is a prerequisite a person must have before being allowed to obtain a fishing license.

The Conservation license can be obtained from the Fish, Wildlife & Parks or FWP. This is done by giving one’s social security number and other information that is requested. A valid driver’s license or any valid ID with photo must also be presented for security purposes for the license to be processed.

Once that is done, a fishing license can be acquired which is neither non-transferable nor non-refundable and is only valid for one year.

Fish that are normally caught in Texas are flounder, trout and sheepshead.

Here are some tips that will help anyone who wants to go fishing in Texas;

1. The first thing to do is get the right equipment: a good boat, fishing rod, reels and bait.

2. If one is not familiar with the place, it is best to ask the locals where the best fishing ground is then start from there.

3. Hooks can be in different sizes. The right hook for fishing is dependent on the kind of bait that will be used.

4. To prevent injury especially when taking out the fish caught in the hook, it is advisable to do it using wet hands.

5. The primary source of food for Seagulls is fish. If there is a flock in one area it means that place is good for fishing. One should approach quietly and set the bait and just wait for the fish to start coming in.

6. Some fish stray when the water is clear but it is quite difficult since the fish can also see the bait. To be able to catch more fish, the best place to do it is in deep water.

7. It is also advisable to try a variety of bait when fishing. Some fish can easily be caught with one kind while others are not. It takes practice to get it right and patience for the fish to come out and haul it in.

By: D.Rhadika


There will always be challenges whether one decides to fish either in the river or in the open sea. The important thing to remember is to have patience waiting for the fish and doing your best to catch it when it appears.

To be able to fish, a person needs to get a fishing license since this is a requirement by law and the regulations regarding fishing varies from one state to the other.

The first thing one needs for salt water fishing is a boat. It can range from a simple row boat to a yacht. The size of this vessel depends on how many people will join the trip.

For people who will do it in-shore, a 15 foot sailboat that comes with a cuddy forward to serve as a shelter when it rains should do the job. The boat should not be heavy and yet adequately sturdy to not be swayed by the action of strong waves or some bumps on the beach or on the rocks.

One should always try the edges of the perimeter first instead of plopping bait or lure in the middle. This is because it will scare the other fish away. By going through the sides first, one will have a better chance of catching unsuspecting fish in the middle.

If one decides to go "down below" some time, a cod-line is a necessity for everybody to enjoy saltwater fishing. A perch-line will also be good and if it's time for mackerel fishing, a mackerel jig will be an excellent help.

The right time to start salt water fishing is on the ebb tide. This should be during an early time of the morning to ensure that the trip will be a productive one. This will put the tide in one’s favor and if the wind is light or not fair, this will also help in going home quickly.

The best place to start fishing is going to a fishing ground that is well known to the locals.

Many anglers who are too impatient move from one spot to another which at times make these people miss a hotspot further decreasing the chances of catching fish. It is advisable to cast out a couple of times before moving on using different types of bait. This should be done from the shallowest to the deepest point.

Sharks in the area can disrupt people from catching fish. By pouring some fish blood on a paper towel or newspaper and rolling it into a ball then casting it overboard, sharks will follow the current and leave the area increasing the chances of catching fish.